× 1-800-946-2642 Home My Account Social / Forum Contact My Cart
Shop Now
Select Your Car Type
Your Order / Return May Be Delayed Due To Shipping Irregularities.   Read More
Verto Clutch Kit Fits All 1300cc Fuel Injected  Classic Minis

Verto Clutch Kit Fits All 1300cc Fuel Injected Classic Minis

Verto Clutch Kit Fits All 1300cc Fuel Injected  Classic Minis
Part No: GCK152AF
Fits the following:
Classic Mini
Alternate Products
Classic Austin Mini Verto Clutch Kit For Injection Models
$233.95 Classic Austin Mini Verto Clutch Kit For Injection Models

3 piece clutch kit with the larger 190mm wide for 1990 on and all Classic Mini Cooper Fuel injected cars, but it can be used on earlier non injection Verto type engines only if the flywheel is 100% PERFECT WITHOUT WEAR. Check nothing fouls when bolting up in case of mismatches. Buy the best as we have tried the rest.

Non injection cars do not need the clutch trigger alignment correct to work but Injection cars do require the correct assembly. Use your original centre boss to ensure correct pick up point positions. The centre boss is available as DAM5921.

Clutch kits should be re-balanced to the flywheel assembly as originally done on production. This is because the verto pressure was a heavier item and the main mass rather than the flywheel as on earlier diaphragm models. This was recognized as a small design fault but easily overcome by balancing which is why Rover originally supplied complete balanced Verto assemblies as repacement parts.

Do not forget to change the AAU2866 seal for the clutch release bearing to plunger. If you are looking for an upgrade clutch see C-AEG485 pressure plate and your choice of plate.


Related Technical Articles:
A Basic Guide to Electronic Fuel Injection for Minis
Created: February 16, 2000
If done properly, converting your Mini to EFI can have many benefits. The EFI Engine Control Unit (ECU) can control all aspects of the combustion of the air/fuel ratio under all conditions. For each and every load point throughout the rev range that the engine may experience, the EFI ECU can calculate the optimum timing and delivery of fuel as well as precisely when ignition will take place by supplying spark at exactly the right time in order to maximise power and torque.
Classic Mini Flywheel and Clutch Identification
Created: March 08, 2009
Austin Mini flywheel and clutch identification is explained and illustrated with color photos of early vs. later designs.
Mini Cooper Verto Clutch Information
Created: August 06, 2008
This article has been written owing to the increasing amount of people who call Mini Spares stating that their 1275cc Injection type Mini will not start after fitting a new clutch, especially when they have purchased the parts from another supplier rather than a Mini specialist.