Kit includes:

• Pressure plate with bolts
• Clutch disc
• Throwout bearing 

If you are looking to replace the Clutch AND the Flywheel, take a look at the factory Clutch & Flywheel Service Kits.

Fits the following Cooper S models with the N14 engine:

2007-2010 R56 MINI Cooper S Hatchback
2008-2010 R55 MINI Cooper S CLUBMAN
2009-2010 R57 MINI Cooper S Converbibles

Also compatible with JCW models with the N14 engine.

When servicing the clutch, MINI recommends replacing the Flywheel Bolts, Pressure Plate Bolts, and the Guide Tube. Both the Flywheel Bolts and the Pressure Plate Bolts are considered 'stretch' bolts and need to be replaced when servicing the clutch. The throwout bearing or clutch release bearing rides on the Guide Tube which is a wear item that should be replaced during a clutch service. For a Kit including these items, see the Mini Cooper Clutch Service Kit Gen2.

See this link for the MINI factory Clutch and Flywheel Service Kit.

MINI Factory Clutch Kit Application Chart:

For the replacement factory flywheel, see G2NMG7600.

For Performance Clutch/Flywheel kits, see G2NMG1640.

For Performance Clutch kits, see G2NMG1601.

For the 1st Generation 02-06 R50 MINI Cooper and R53 Cooper S Hatchback and 05-08 R52 MINI Cooper and Cooper S Convertibles, see NMG7600-P.

MINI Factory Remanufactured Clutch Rebuild Kit for the Cooper S with the N18B16A engine. This is the same kits used by the MINI dealers.

Kit includes:

• pressure plate with bolts
• 235mm clutch disc
• throwout bearing.

If you are looking to replace the Clutch AND the Flywheel, take a look at the factory Clutch & Flywheel Service Kits.

Fits the following Cooper S models with the N18 engine:

2011-2013 R56 MINI Cooper S Hatchback
2011-2014 R55 MINI Cooper S Clubman
2011-2015 R57 MINI Cooper S Converbible 
2012-2015 R58 MINI Cooper S Coupe
2012-2015 R59 MINI Cooper S Roadster
2011-2015 R60 MINI Cooper S Countryman
2013-2016 R61 MINI Cooper S Paceman

Also fits JCW models FROM 02/2013.

When servicing the clutch, MINI recommends replacing the Flywheel Bolts, Pressure Plate Bolts, and the Guide Tube. Both the Flywheel Bolts and the Pressure Plate Bolts are considered 'stretch' bolts and need to be replaced when servicing the clutch. The throwout bearing or clutch release bearing rides on the Guide Tube which is a wear item that should be replaced during a clutch service. For a Kit including these items, see the Mini Cooper Clutch Service Kit Gen2.

NOTE:  Factory specifies the Clutch Pedal Spring must be also replaced when installing this clutch. Order separately.

See this link for the MINI factory Clutch and Flywheel Service Kit.

MINI Factory Clutch Kit Application Chart:

For the replacement factory flywheel, see G2NMG7600.

For Performance Clutch/Flywheel kits, see G2NMG1640.

For Performance Clutch kits, see G2NMG1601.

For the 1st Generation 02-06 R50 MINI Cooper and R53 Cooper S Hatchback and 05-08 R52 MINI Cooper and Cooper S Convertibles, see NMG7600-P.

Kit includes:

• Pressure plate with bolts
• Clutch disc
• Throwout bearing

If you are looking to replace the Clutch AND the Flywheel, take a look at the factory Clutch & Flywheel Service Kits.

Fits the following Cooper (non-S) models:

2007-2013 R56 MINI Cooper Hatchback
2008-2014 R55 MINI Cooper Clubman
2009-2015 R57 MINI Cooper Converbible
2012-2015 R58 MINI Cooper Coupe
2012-2015 R59 MINI Cooper Roadster
2011-2016 R60 MINI Cooper Countryman
2013-2016 R61 MINI Cooper Paceman

When servicing the clutch, MINI recommends replacing the Flywheel Bolts, Pressure Plate Bolts, and the Guide Tube. Both the Flywheel Bolts and the Pressure Plate Bolts are considered 'stretch' bolts and need to be replaced when servicing the clutch. The throwout bearing or clutch release bearing rides on the Guide Tube which is a wear item that should be replaced during a clutch service. For a Kit including these items, see the Mini Cooper Clutch Service Kit Gen2.

See this link for the MINI factory Clutch and Flywheel Service Kit.

MINI Factory Clutch Kit Application Chart:

For the replacement factory flywheel, see G2NMG7600.

For Performance Clutch/Flywheel kits, see G2NMG1640.

For Performance Clutch kits, see G2NMG1601.

Kit includes:

• Pressure plate with bolts
• Clutch disc
• Throwout bearing

Fits the following JCW models with the N14 engine:

2007-01/2013 R56 JCW MINI Cooper S Hatchback
2008-01/2013 R55 JCW MINI Cooper S CLUBMAN
2009-01/2013 R57 JCW MINI Cooper S Converbibles
2012-01/2013 R58 JCW MINI Cooper S COUPE
2012-01/2013 R59 JCW MINI Cooper S Roadster

When servicing the clutch, MINI recommends replacing the Flywheel Bolts, Pressure Plate Bolts, and the Guide Tube. Both the Flywheel Bolts and the Pressure Plate Bolts are considered 'stretch' bolts and need to be replaced when servicing the clutch. The throwout bearing or clutch release bearing rides on the Guide Tube which is a wear item that should be replaced during a clutch service. For a Kit including these items, see the Mini Cooper Clutch Service Kit Gen2.

See this link for the MINI factory Clutch and Flywheel Service Kit.

MINI Factory Clutch Kit Application Chart:

For the replacement factory flywheel, see G2NMG7600-P.

For Performance Clutch/Flywheel kits, see G2NMG1640.

For Performance Clutch kits, see G2NMG1601.