Distributor Cap For Powerspark Psd5 & Psd10 DistributorsDistributor Cap For Powerspark Psd5 & Psd10 DistributorsDistributor Cap For Powerspark Psd5 & Psd10 DistributorsDistributor Cap For Powerspark Psd5 & Psd10 DistributorsDistributor Cap For Powerspark Psd5 & Psd10 DistributorsDistributor Cap For Powerspark Psd5 & Psd10 DistributorsDistributor Cap For Powerspark Psd5 & Psd10 DistributorsDistributor Cap For Powerspark Psd5 & Psd10 DistributorsDistributor Cap For Powerspark Psd5 & Psd10 DistributorsDistributor Cap For Powerspark Psd5 & Psd10 DistributorsDistributor Cap For Powerspark Psd5 & Psd10 DistributorsDistributor Cap For Powerspark Psd5 & Psd10 Distributors
Austin Mini Rotor Arm All 1974 And Later Until 1992Austin Mini Rotor Arm All 1974 And Later Until 1992Austin Mini Rotor Arm All 1974 And Later Until 1992Austin Mini Rotor Arm All 1974 And Later Until 1992Austin Mini Rotor Arm All 1974 And Later Until 1992Austin Mini Rotor Arm All 1974 And Later Until 1992Austin Mini Rotor Arm All 1974 And Later Until 1992Austin Mini Rotor Arm All 1974 And Later Until 1992Austin Mini Rotor Arm All 1974 And Later Until 1992Austin Mini Rotor Arm All 1974 And Later Until 1992
Classic Mini Distributor Cap 65d Spi 1991-1996 And MetroClassic Mini Distributor Cap 65d Spi 1991-1996 And MetroClassic Mini Distributor Cap 65d Spi 1991-1996 And MetroClassic Mini Distributor Cap 65d Spi 1991-1996 And MetroClassic Mini Distributor Cap 65d Spi 1991-1996 And MetroClassic Mini Distributor Cap 65d Spi 1991-1996 And MetroClassic Mini Distributor Cap 65d Spi 1991-1996 And MetroClassic Mini Distributor Cap 65d Spi 1991-1996 And MetroClassic Mini Distributor Cap 65d Spi 1991-1996 And Metro
$3.95
Classic Mini rotor late A+ metro for GDC156 electronic cap
This was the first mini distributor cap to have screws hold the cap to the body from about 1990 on where electonic ignition was introduced ,therefore there are no points or condenser but the rotor arm to use is GRA2143.Fits all 1992 onwards injection cars up until 1997.
Austin Mini Ducellier Distributor CapAustin Mini Ducellier Distributor CapAustin Mini Ducellier Distributor CapAustin Mini Ducellier Distributor CapAustin Mini Ducellier Distributor CapAustin Mini Ducellier Distributor CapAustin Mini Ducellier Distributor CapAustin Mini Ducellier Distributor Cap
Austin Mini Distributor Rotor Up To 74 Lucas 23/25d Heavy Duty TypeAustin Mini Distributor Rotor Up To 74 Lucas 23/25d Heavy Duty TypeAustin Mini Distributor Rotor Up To 74 Lucas 23/25d Heavy Duty TypeAustin Mini Distributor Rotor Up To 74 Lucas 23/25d Heavy Duty TypeAustin Mini Distributor Rotor Up To 74 Lucas 23/25d Heavy Duty TypeAustin Mini Distributor Rotor Up To 74 Lucas 23/25d Heavy Duty TypeAustin Mini Distributor Rotor Up To 74 Lucas 23/25d Heavy Duty Type
$3.95
Classic Mini rotor late A+ metro for GDC156 electronic cap
Finally a heavy duty red epoxy ignition rotor for the Lucas distributor DM2 , 22D4 , 23D , nad 25D . With todays high energy ignitions a heavy duty rotor is needed that will not ground through.
Austin Mini Rotor For The Ducellier DistributorAustin Mini Rotor For The Ducellier DistributorAustin Mini Rotor For The Ducellier DistributorAustin Mini Rotor For The Ducellier DistributorAustin Mini Rotor For The Ducellier DistributorAustin Mini Rotor For The Ducellier Distributor
$3.95
Classic Mini rotor late A+ metro for GDC156 electronic cap
If you have a red distributor cap (GDC214) its likely that you have a Ducellier distributor and this is the rotor arm for it. Contact set is GCS2119 and the condenser is GSC2113
Classic Mini Distributor Rotor Up To 1974 23d And 25dClassic Mini Distributor Rotor Up To 1974 23d And 25dClassic Mini Distributor Rotor Up To 1974 23d And 25dClassic Mini Distributor Rotor Up To 1974 23d And 25dClassic Mini Distributor Rotor Up To 1974 23d And 25d
Classic Austin Mini Distributor Cap Side Entry For 23d And 25d (gdc102)Classic Austin Mini Distributor Cap Side Entry For 23d And 25d (gdc102)Classic Austin Mini Distributor Cap Side Entry For 23d And 25d (gdc102)Classic Austin Mini Distributor Cap Side Entry For 23d And 25d (gdc102)
$15.96
Classic Mini Distributor Cap Top Entry 23d And 25d
Side entry distributor cap, as original. This cap fits all early cars with 23D/25D type distributors as found on the MK1/II Minis, all Morris Minor and early Sprites and Midgets. No tune up or trouble shooting is complete without replacing the distributor cap. Keep a spare in your car and on the shelf.
$19.96
Classic Austin Mini Distributor Cap Side Entry For 23d And 25d (gdc102)
Top-entry cap takes plug-in wires and will interchange with DC1. The DC6 is much less prone to wet-weather problems.
This cap fits the early Minis that have a Pre A+ engine and use the Lucas 25D Distributor. Study the Technical information below to confirm exactly what you have, as many early models have been updated with later engines.
$19.96
Classic Austin Mini Distributor Cap Side Entry For 23d And 25d (gdc102)
This rotor arm fits all A series electronic distributors when points are not fitted except for turbo --the distributor cap for this rotor arm is GDC156
We are having a SPARKLING SALE on select Spark Plugs & Components
Check out the special LIMITED TIME ONLY savings on the parts below.
STOCK UP AN SAVE!!
Your E-Mail and/or password are incorrect. Please try again.
Note: As of Oct 15th 2020, you must use your e-mail address, not your username. Passwords are also case-sentive.
If you continue to have problems click on the Help Icon for additional options.
Login with your E-Mail Address. If you would like your login information reset, click on the button below to request your login information to be reset.
We have detected you're not on the correct site for the car you have selected! Click the green button below to go to the correct site.
